with our rhodium tank plating kit all youhave to do is set up our equipment and our rhodium plating solution will quickly deposita super bright layer of pure rhodium in minutes. we've streamlined the process so all the platingsettings are programmed in to the equipment before you start plating so all you have todo is clean and plate your item. once you've set up your equipment, turn on your platingrectifier and make sure the output switch is off. adjust the volts to within a rangeof 3-3.4 attach the red lead to the plating arm which will......turn on the output switchand adjust the current to the required level, in this case 0.09 turn off the output switch,reattach red lead to the mesh and adjust the voltage on the small rectifier for the cleanerto 4.5
preparing the surface for plating is verystraightforward, just dip your work in our cleaner for about 30 seconds and pass it through2 rinse baths of ordinary water and you're ready to rhodium plate. no need for dangerousacid baths, activation or extra layers of nickel. once your work is in the rhodium solutionturn on the output switch and plate for three minutes. finish with a rins in the 2 waterbaths. and of course with our solutions, you can plate straight onto sterling silver oryellow gold without having to pre-plate any other layer. for a step-by-step guide on workingout plating times and setting up our rhodium kit, please see our tank plating section atthe back of our manual.
No comments:
Post a Comment